Fire Expo

PRODUCTS: Wireless fire system Streletz-PRO architecture and technical characteristics. A virtual classroom for the programming of Streletz-PRO.  Designing the Streletz-PRO network. An overview of wireless fire systems of international manufacturers.
REGULATIONS: Radio Equipment Directive (RED) requirements.
CASE STUDIES: In the fight against COVID-19 the Russian Government has ordered the fast track construction of 30 new hospitals. 17 of them were built in 60 days. All of them are protected by the Streletz-PRO wireless fire system.

The location of the expanders in the building plays a crucial role in the reliability of the Streletz-PRO network.
Expanders receive signals from devices and transmit them to the translator module, which is connected to the control panel. The system operates similarly to a cellular network. Much like mobile phones can automatically connect to a cell tower, wireless sensors link to the expander with the strongest signal and relink to a different one if the connection is lost. The signals will then travel through multiple expanders before reaching the translator, and this communication path is also established and adjusted automatically.
This video will guide you through the process of calculating the right number of expanders and identifying the proper places to install them.

Significant increase in battery life has become possible due to the optimization of the data exchange protocol in the Streletz-PRO: mesh network technology allows each device to automatically select the shortest and most energy efficient communication route. Plus, electronic components have also become more energyefficient and the advancements in the electric vehicle industry led to a new perfomance level of batteries. This means wireless Streletz-PRO devices now boast a 10-year battery service life. This extended lifespan of the batteries lowers the overall ownership cost of the system, as the batteries will last throughout the devices’ entire usage span.
Every device connected to Streletz-PRO keeps both the main and backup batteries under control. If either battery runs low, the LED on the device will start blinking, and this data gets sent to the control panel. Thanks to the softwaredriven current state monitoring service, you can plan ahead and replace batteries before they become a problem.

Wireless systems are protected from electromagnetic interference even better than wired counterparts. The voltage that occurs due to EMI is directly proportional to the length of the conductor. Therefore, long cables essentially act as antennas for interference. In wireless systems, you don’t have long electrical currents that capture electromagnetic interference, making them much less troublesome to maintain.
Smart Timing: Devices communicate less frequently in standby mode to save energy. But when the connection is weak, they swiftly intensify communication to the expander for a rapid response.
Signal Strength: The transmission signal is usually dialed down for battery conservation, but when interference strikes, the signal strength amps up to ensure a dependable connection. 
Frequency Flexibility: Operating across 6 frequency channels within the 865-867 MHz range, the Streletz-PRO system automatically switches to backup channels when interference shows up. This secures consistent signal delivery.

Streletz-PRO in a VIRTUAL classroom! 
Argus Spectrum is very pleased to present its new and unique service for the fire detection world!
Web Camera + IP connected kit of actual devices - a leading edge virtual classroom for the programming of “Streletz-PRO” wireless fire detection system!
The online practical training is simple and easy to use! You will need a desktop or laptop computer and internet access. Simply register at www.educ.argusspectrum.com learning platform.
The online practical training is the perfect way to learn Streletz-PRO. You can study from home or from any place in the world at any time!
Learn how to get started today!

The video tour of the Streletz-Master software and the online learning center
In this video, you will find out how you can use the Streletz-Master software to test the system, check the connection strength, read measurements from devices, and change their settings.
The virtual classroom allows fire alarm engineers from all around the world to use one of the remote equipment kits to introduce themselves to the Streletz-PRO wireless alarm system. The user can control and monitor the equipment kit in the Streletz-Master software, while simultaneously observing each device through a live camera feed. The service is completely online, which means that you don’t need physical access to a real system in order to learn how to use it.

Why Streletz-PRO?
One of the main challenges of installing a fire alarm in a medical facility is to minimize installation time and reduce the number of visits to the building. How can wireless technologies make these goals a lot more achievable?
First of all, you can design a wireless fire alarm from the comfort of your house, without having to visit the building. In order to calculate the layout of the devices you only need a computer and the floor plans. 
Secondly, a wireless system requires no electrical work and the detectors are simply attached to the ceiling with 2 screws. Two workers with no special qualification can install a wireless fire alarm in just one day. 
Finally, a wireless fire alarm can be configured even from a home computer, as the software connects to the system via the Internet. You can also remotely monitor the state of each device and send engineers to the building only when it’s necessary. 

Streletz-PRO wireless fire detection system was chosen for infectious-disease hospitals
In the fight against COVID-19 the Russian Government has ordered the fast track construction of 30 new hospitals to be built, 16 of them to be built in 16 regions of the country in 60 days. It is mandatory for these buildings to be equipped with reliable and proven fire detection systems. Argus Spectrum has been chosen to provide all the hospitals with the “Streletz-PRO” advanced wireless fire detection system in a record time.
More than 60,000 “Streletz-PRO” wireless devices will be installed and commissioned in the new medical centers.

Day and Night Support 
Argus Spectrum is providing the system installers with 24-hour comprehensive technical support. This support is available by telephone and by our engineers visiting the site to provide direct technical assistance during the installation phase. For remote regions support is organised and provided through webinars. 
Despite the current ‘lock-down’ our partners are able to rely on our committed support and be assured that we are available online at all times, especially during the night.  This is particularly important for our partners who are working through the many time zones in Russia. 

Manufacturing for COVID-19 Hospitals
Today our factory in St Petersburg is working day and night producing equipment for the new COVID-19 hospitals. 120 people work in two 8-hours shifts: from 7am to 4 pm and from 4 pm to 12 am. A further night shift can be added if required. 
“Our productivity depends on two highly important things: our team and our organization process. The team is ready to work in shifts. All of them understand why it is necessary today", states Tatiana Shevtsova, Production Director, "Our factory operates within the lean manufacturing system. We manufacture products ‘just-in-time’ and this turned out to be crucial today.” 

Argus Spectrum is very pleased to showcase our latest news and products and to invite you to visit our online fire exhibition!

1.1 Wireless Fire System Streletz-PRO Architecture

Streletz-PRO Product Review

1.2 Streletz-PRO technical characteristics

Advanced technical specifications:

1.3 Designing the Streletz-PRO network

1.4 Streletz-PRO -10 years of battery life

1.5 Streletz-PRO - Resistance to interference

1.6 Streletz-Cloud Service

1.7 A virtual classroom for the programming of Streletz-PRO

www.educ.argusspectrum.com

Streletz-PRO in a VIRTUAL classroom!

The video tour of the Streletz-Master software and the online learning center

1.8 Streletz-PRO system video

1.9 Overview of wireless fire systems & FAQ

2.1 Radio Equipment Directive (RED) requirements

3.1 "Streletz-PRO" in 30 new COVID-hospitals

17 hospitals were built in 60 days

Stages of construction for a new contagious hospital in the Moscow region

Why Streletz-PRO?

Streletz-PRO wireless fire detection system was chosen for infectious-disease hospitals

Day and Night Support

Manufacturing for COVID-19 Hospitals

Wireless fire detection system in medical facilities - LEAFLET